Picatinny Rail Cutters

Mill the inverse form for the Picatinny Rail used for attachmentsCutting on entirety of angle and flatShort reaches for maximum strength6 flutesSolid carbideCNC ground in the USAD1      CUTTER DIA              0.5"   (tol. +.000" / -.002")F         TIP FLAT                            0.021"L2      LENGTH OF CUT          .0.2075"  (tol +.001" / -.001")Neck DIA.                                   1/4" (0.25")D2 SHANK DIA                      1/2" (0.50")L1 OAL ..

Mill the inverse form for the Picatinny Rail used for attachmentsCutting on entirety of angle and flatShort reaches for maximum strength6 flutesSolid carbideCNC ground in the USAAlTiN CoatingD1  CUTTER DIA              0.5"   (tol. +.000" / -.002")F     TIP FLAT                        0.021"L2  LENGTH OF CUT          .0.2075"  (tol +.001" / -.001")Neck DIA.                               1/4" (0.25")D2 SHANK DIA                  1/2" (0.50")L1 OAL                                3" (3.0")..

Mill the inverse form for the Picatinny Rail used for attachmentsCutting on entirety of angle and flatShort reaches for maximum strength6 flutesSolid carbideCNC ground in the USAD1      CUTTER DIA              0.625"   (tol. +.000" / -.002")F         TIP FLAT                            0.021"L2      LENGTH OF CUT          .0.2075"  (tol +.001" / -.001")Neck DIA.                                   1/4" (0.25")D2 SHANK DIA                      1/4" (0.25")L1 OAL   &..

Mill the inverse form for the Picatinny Rail used for attachmentsCutting on entirety of angle and flatShort reaches for maximum strength6 flutesSolid carbideCNC ground in the USAAlTiN CoatedD1      CUTTER DIA              0.625"   (tol. +.000" / -.002")F         TIP FLAT                            0.021"L2      LENGTH OF CUT          .0.2075"  (tol +.001" / -.001")Neck DIA.                                   1/4" (0.25")D2 SHANK DIA                      1/4" (0.25")L1 OA..

Cutter Diameter:0.2060"Length of Cut:0.1180"Shank Diameter:0.2500" (1/4)Overall Length:2.5000" (2-1/2)Flutes:3..

Cutter Diameter:0.2100"Length of Cut:0.1180"Shank Diameter:0.2500" (1/4)Overall Length:2.5000" (2-1/2)Flutes:3..

Designed to the MIL-STD-1913 specificationsMill the entire Picatinny Rail in a single pass without tool changesType II: .005" radius tangent to angle and L4Cutting on entirety of concave form and OD flat at end4 helical flutes for better cutting action.005" max radius for all internal cornersSolid carbideCNC grounded in USA D1  CUTTER DIA     0.5"   (tol. +.000" / -.002")L2  LENGTH OF CUT .377"  (tol +.001" / -.001") D3  MINOR DIA.    .282   (tol +.001" / -.001")L6   0.021"L4  0.137"Type IID2  SHANK DIA  0.5"L1   OAL   2.5"..

Designed to the MIL-STD-1913 specificationsMill the entire Picatinny Rail in a single pass without tool changesType II: .005" radius tangent to angle and L4Cutting on entirety of concave form and OD flat at end4 helical flutes for better cutting action.005" max radius for all internal cornersSolid carbideCNC grounded in USA AlTiN CoatedD1  CUTTER DIA     0.5"   (tol. +.000" / -.002")L2  LENGTH OF CUT .377"  (tol +.001" / -.001") D3  MINOR DIA.    .282   (tol +.001" / -.001")L6   0.021"L4  0.137"Type IID2  SHANK DIA  0.5"L1   OAL   2.5"..

Designed to the MIL-STD-1913 specificationsMill the entire Picatinny Rail in a single pass without tool changesType II: .005" radius tangent to angle and L4Cutting on entirety of concave form and OD flat at end4 helical flutes for better cutting action.005" max radius for all internal cornersSolid carbideCNC grounded in USA AlTiN CoatedD1  CUTTER DIA     0.5"   (tol. +.000" / -.002")L2  LENGTH OF CUT .377"  (tol +.001" / -.001") D3  MINOR DIA.    .282   (tol +.001" / -.001")L6   0.021"L4  0.137"Type IID2  SHANK DIA  0.5"L1   OAL   3.0"..

Designed to the MIL-STD-1913 specificationsMill the entire Picatinny Rail in a single pass without tool changesType II: .005" radius tangent to angle and L4Cutting on entirety of concave form and OD flat at end4 helical flutes for better cutting action.005" max radius for all internal cornersSolid carbideCNC grounded in USA AlTiN CoatedD1  CUTTER DIA     0.5"   (tol. +.000" / -.002")L2  LENGTH OF CUT .377"  (tol +.001" / -.001") D3  MINOR DIA.    .282   (tol +.001" / -.001")L6   0.021"L4  0.137"Type IID2  SHANK DIA  0.5"L1   OAL   3.0"..

Designed to the MIL-STD-1913 specificationsMill the entire Picatinny Rail in a single pass without tool changesType II: .005" radius tangent to angle and L4Cutting on entirety of concave form and OD flat at end4 helical flutes for better cutting action.005" max radius for all internal cornersSolid carbideCNC grounded in USA D1  CUTTER DIA     0.625"   (tol. +.000" / -.002")L2  LENGTH OF CUT .377"  (tol +.001" / -.001") D3  MINOR DIA.    .282   (tol +.001" / -.001")L6   0.021"L4  0.137"Type IID2  SHANK DIA  0.625"L1   OAL   3.5"..

Designed to the MIL-STD-1913 specificationsMill the entire Picatinny Rail in a single pass without tool changesType II: .005" radius tangent to angle and L4Cutting on entirety of concave form and OD flat at end4 helical flutes for better cutting action.005" max radius for all internal cornersSolid carbideCNC grounded in USA AlTiN CoatedD1  CUTTER DIA     0.625"   (tol. +.000" / -.002")L2  LENGTH OF CUT .377"  (tol +.001" / -.001") D3  MINOR DIA.    .282   (tol +.001" / -.001")L6   0.021"L4  0.137"Type IID2  SHANK DIA  0.625"L1   OAL   3.5"..