Menu
Your Cart

All Products

1/4 Screw Machine Stub Length Carbide Drill 1/4x1/2x2
On Sale
Screw Machine Stub LengthFlutes: 2Diameter: 1/4" (0.25) In.Length of Cut:  1/2"Overall Length:   2"End Style: 135° Drill PointIncluded Angle: 135°Material: Solid CarbideMaterial Grade:  C-2 Sub-MicronCut Direction: Right HandDiameter Tolerance: +0.0000 / -0.0005"..
$25.00
Carbide Dovetail Cutters1/8 (0.125") Diameter 3 Flute 90 Degree Included Angle 1/8" Diameter3" OAL..
$35.00
Item 1A1R Cut Off Grinding WheelAbrasive Wheel Type Type 1   Abrasive Wheel Diameter (D) 6"Arbor Hole Size (H) 1-1/4"Thickness (T) 0.035"Abrasive Material DiamondAbrasive Grit 120Max. RPM 6050Bond Type ResinAbrasive Depth (X) 0.28"..
$65.00
2 Flutes High Performance Endmill with 45 Degree HelixUncoatedDiameter:                         3/8"Shank Diameter              3/8"Length of Cut (LOC)          1/2"Overall Length (OAL)       6" Length Below Shank        3.25"45 degree HelixRH Cut, RH Flute, CentercuttingEndmill FeaturesHigh Finish Directional Chip Groove Flute FaceHigh Finish Eccentric ODHigh Finish Ground on Edge Prep Body Clearance..
$0.00
2 Flutes High Performance Ballnosed Endmill with 45 Degree HelixUncoatedDiameter:                         3/8"Shank Diameter              1/2"Length of Cut (LOC)         1"Overall Length (OAL)       6"Length below Shank        3" with .355" Neck 45 degree HelixRH Cut, RH Flute, CentercuttingEndmill FeaturesHigh Finish Directional Chip Groove Flute FaceHigh Finish Eccentric ODHigh Finish Ground on Edge Prep Body Clearance..
$60.00
Tool Diameter(mm)2.45Shank typeEnd Mill ShankWork MaterialGeneral Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Groove Length(mm)10Coating PresenceNoneGroove ShapeStraightBase-Blade AvailabilityIncludedNo.4Bottom Blade ShapeF (Flat)Diameter Tolerance(mm)0 ~ 0.003Shank Diameter d(mm)4Number of Flutes2Overall Length L(mm)50Neck Length (ℓ1)(mm)-Radius (R)(mm)0.2Length Under Neck ℓ2-Tool Material TypeCarbide..
$69.00
3 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           1-1/4"Overall Length (OAL)        3" Coating                              ZrNCorner Radius                  .030 Radius45 degree HelixMicrograin Solid CarbideProduct Features:45 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting edgesManufactured in the U.S.A. using premium ..
$75.00
3 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           1-1/4"Overall Length (OAL)        3" Coating                              ZrNCorner Radius                   Square End45 degree HelixMicrograin Solid CarbideProduct Features:45 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting edgesManufactured in the U.S.A. using pre..
$45.00
3/16 Screw Machine Stub Length Carbide Drill 3/16x1/2x2
On Sale
Screw Machine Stub LengthFlutes: 2Diameter: 3/16" (0.25) In.Length of Cut:  1/2"Overall Length:   2"End Style: 135° Drill PointIncluded Angle: 135°Material: Solid CarbideMaterial Grade:  C-2 Sub-MicronCut Direction: Right HandDiameter Tolerance: +0.0000 / -0.0005"..
$20.00 $20.00
3/8 Dia x 6" OAL Carbide Tipped Safe Drill Bits 3/8 Dia x 6" OAL Carbide Tipped Safe Drill Bits
On Sale
These Carbide Tip Drill bits are specially designed for drilling through safes, hard plate, and other demanding metal work at affordable price.With their sharpened tips, designed for opening safes, they are ideal for drilling through walls and especially helpful if you should encounter any rebar.Cutting Diameter 3/8"Shank Diameter 3/8"Overall Length (OAL)      6" ..
$20.00 $30.00
4 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           1-1/4"Overall Length (OAL)        3" Coating                              ALTIN Micrograin Solid CarbideProduct Features:Manufactured in the U.S.A. using premium 10% cobalt micrograin carbide..
$80.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           1-1/4"Overall Length (OAL)        3" Coating                              AlTiN Corner Radius                   .03038 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting..
$70.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           1-1/4"Overall Length (OAL)        3" Coating                              AlTiN Corner Radius                   .06038 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting..
$70.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)          1-1/2"Overall Length (OAL)        3.5" Coating                             AlTiN Corner Radius                   .015"38 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting edgesManufactured in the U.S.A. using premium 10% cobalt micrograin carbide..
$80.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)          1-5/8"Overall Length (OAL)        3.5" Coating                             AlTiN Corner Radius                   .015"38 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting edgesManufactured in the U.S.A. using premium 10% cobalt micrograin carbide..
$83.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           1"Overall Length (OAL)        2-1/2" Coating                              AlTiN Corner Radius                   .01538 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting..
$58.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           1"Overall Length (OAL)        2-1/2" Coating                              AlTiN Corner Radius                   .03038 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting..
$58.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           5/8"Overall Length (OAL)        2-1/2" Coating                              AlTiN Corner Radius                   .01538 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutti..
$58.00
7 Flutes High Performance End MillsCutting Diameter              1/2"Shank Diameter                1/2"Length of Cut (LOC)           5/8"Overall Length (OAL)        2-1/2" Coating                             AlTiN Corner Radius                   .030"38 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting edgesMa..
$58.00
7 Flutes High Performance End MillsCutting Diameter              3/8"Shank Diameter                3/8"Length of Cut (LOC)           3/4"Overall Length (OAL)        2-1/2" Coating                             AlTiN Corner Radius                   .015"38 degree HelixMicrograin Solid CarbideProduct Features:38 Degree Helix maximizes tool core rigidity and also improves chip removal rateVariable Index Geometry designed to minimize chatter resulting in an exceptional finishEccentric OD Relief (positive arched cutting edge) for increased strength of the cutting edgesManufactured in the U.S.A. using premium 10% cobalt micrograin carbide..
$51.00
1. Convenient Design: X, Y-axis workable2. Cutting Capacity:    Cutting diameter: 1/8" - 5/8" (3-16m)     Cutting length of work-piece end:  9/16" (15mm)/max.3. Patent Radius cutting by Dual-motor driver4. Quick-Work-Changing System:  3-Jaw chuck system.5. Cooling System: Dry cooling6. Cutting Disc: SD#100 for carbide, CBN100 for HSS7. Optional Grinding Wheel: For Neck grinding SD#100 width 5mm, 10mm for carbide, CBN#100 width 5mm, 10mm for HHS.WeightN.W. 27.5Kg  /  G.W. 29.5Kg /N.W. 60.62 lb / G.W. 65.04 lbMachine Size405mm x 245mm x 225mm / 15-15/16" x 9-5/8" x 8-7/8"Packing Size470mm x 320mm x 320mm / 18-1/2" x  12-5/8" x 12-5/8"Standard AccessoriesSD#100 (Φ100mm) (3-15/16") -For Carbide x 1CBN#100 (Φ100mm) (3-15/16") -For HSS x 1E60WA (..
$1,197.00
1. FOR GSC MODEL GS-13 ONLY2. SD100 CUTTING DISC  D100 FOR Carbide 3.Thickness: 0.056" /1.4 mm4.Bond Type: Electroplated Diamond Wheel5.Wheel Diameter:4.0"  (100 mm)6.Arbor Hole Size: 1/2" (12.7 mm)7.Grit: 100..
$36.00
1. FOR GSC MODEL GS-33 ONLY2. SD100 CUTTING DISC  D125 FOR Carbide 3.Thickness: 0.056" /1.4 mm4.Bond Type: Electroplated Diamond Wheel5.Wheel Diameter:5.0"  (125 mm)6.Arbor Hole Size: 3/4" (19.05 mm)7.Grit: 100..
$54.00
1/4" Diameter Dovetail Cutter90° included dovetail cutter2-1/2 inch Overall Length..
$65.00
1. No Collet Needed2. Accurate Chuck Set3.For Diameter   1/8" ~ 1/2"  (3 ~13mm) 4. Adjustable Point Angle 90° - 140°5. CBN#200 For HSS (Default)6.SD#200 For Carbide (Optional)Product Description1. No Collets Needed2. Special Design High Accuracy Chuck Set  3. The grinding angle can be adjusted from 90 to 140 degree4. The allowable grinding drill diameter 1/8" ~ 1/2"  (3 ~13mm) 5. High-Efficiency DC Motor6. Precise Grinding Results, Precision Assurance within 0.1mm7. Easy to Operate, grinding a drill within 10 seconds8. Accurate Grinding Consumption 0.2mm9. Stable Quality Diamond Grinding Wheel10. Considerable Design, Delicate & Friendly Use11. Portable Design with only weight 15.4 lb (7kgs)Product InformationTechnical DetailsModel EC-1Drill Diameter 1/8" ~ 1/2"  (3 ~ 13mm)Point Angle90° - 1..
$518.00
You don’t need to be an expert running this heavy duty, rock solid, tool grinder.  It is capable of sharpening all day, every day with minimal cleaning and maintenance.  This all metal design also integrates an invisible metal toolbox to store collets and help you to be organized at your work place.  If you want the sharper point for the job, but don't want to become a tool grinding cutting expert, the GS-01 drill sharpener is design for you.Drill Diameter Size Range: 2-13mm or #47 (1/16") to 1/2"Drill Point type: standard and split-point by X-thinningDrill Point Range: 90 to 140 deg.Precise Grinding Results, Precision Assurance within 0.05mmEasy to Operate, grinding a drill within 10 secondsAccurate Grinding Consumption 0.2mmStable Quality Diamond Grinding WheelConsiderable Design, Invisible Tool Box, Delicate & Friendly UsePortable Design with only weight of 14.99 Ib (6.8Kg)Power Supply    AC110V 50/60Hz R.P.M. of Motor ..
$798.00
Showing 1 to 30 of 42 (2 Pages)